Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie, consulta la cookie policy. Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all’uso dei cookie. 

Waterproof resin

Waterproof resin: In order to understand deeply the water infiltration matter, we advise to read carefully the sections: MOISTURE STOP and PRESSURE INJECTIONS.
Therefore, in addition to surface/cortical application systems and the ones by impregnating pressure injection, it is possible also to intervene with impregnations for casting or slow diffusion.

In this case the barrier is realized through the use of a series of products developed to impregnate the support, the masonry , the foundations.

These formulations are based on the basis of two principles of action:
1. Closure of the pores and capillaries with consolidating effect;
2 . Reducing the power consumption of the capillaries with water-repellent effect.

The chemical formulations with reinforcing effect are as follows:
- Pavaseal W: two-component resin expansive product, highly reactive in presence of moisture.
- Pavaseal 180E: Two-component solvent-free epoxy product, with long pot -life and low viscosity.

For chemicals formulations with hydrophobic effect , please refer to the section PRESSURE INJECTION. However, even the latter can be injected by casting.

Normally the two-component systems waterproof resin offer high performance but in applications for casting and/or slow diffusion they are not always able to reach high depths .

To receive technical data sheets please contact our offices.

 

FaLang translation system by Faboba